1×4 4K UHD HDMI Splitter Support HDMI 2.0b, HDCP 2.2, HDR & 3D

The BZB-DA-14 high performance 1x4 HDMI 18Gbps Splitter that provides a sophisticated solution for splitting a single HDMI signal into 4 HDMI displays.
MSRP: $99.00
Status: In Stock


The BZB-DA-14 is a 4K HDMI 2.0 1x4 splitter. Supporting resolutions up to [email protected] (4:4:4), this device simultaneously routes one HDMI source to four HDMI displays at speeds up to 18Gbps. This HDCP2.2 compliant unit also supports 3D video formats up to [email protected] as well as high resolution VESA mode video formats up to [email protected] The smart EDID control eliminates any potential connectivity issues.

Supporting multi-channel audio formats including LPCM 7.1CH, Dolby TrueHD and DTS Master Audio, this device can be connected to an audio amplifier or A/V receiver for amazing sound quality.


Supports resolutions up to [email protected] 4:4:4
Multi-channel audio support
Supports LPCM 7.1CH, Dolby TrueHD, DTS-HD
Smart EDID
Eliminates connectivity issues
Compact Design
Easily installed in tight spaces
18Gbps transfer rate
Multiple Outputs
Supports up to 4 displays

Tech Specifications

Video Bandwidth 600MHz/18Gbps
Input Ports 1x HDMI Type A [19-pin female]
Output Ports 4x HDMI Type A [19-pin female]
Output Resolution 480i ~ [email protected]/60, [email protected]/30, [email protected]
ESD Protection Human Body model:
±8kV (Air-gap discharge),
±4kV (Contact discharge)
Power Supply 5V/1A DC (US/EU standards,CE/FCC/UL certified)
Dimensions 2.5″ (W) x 6.4” (D) x 0.6″ (H) [63mm (W) x 163mm (D) x 16mm (H)]
Weight 0.57lbs [260g]
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 32°F ~ 104°F / 0°C ~ 40°C
Storage Temperature -4°F ~ 140°F / -20°C ~ 60°C
Relative Humidity 20~90% RH (non-condensing)
Power Consumption 2W


  • 1x 1X4HDMI 18Gbps Splitter
  • 1x 5V/1A DC Power Adapter
  • 1x User Manual


  1. POWER LED: This blue LED illuminates when the device is connected to the power supply.
  2. IN LED: This blue LED illuminates when a Source is connected to the device.
  3. OUT LEDs: These blue LEDs will light up to indicate which HDMI outputs are connected to an active TV/ display/monitor.
  4. SERVICE: Micro USB firmware update use only.
  5. EDID STD / EDID TV: When in ‘STD’ mode, the unit will use its own built-in EDID settings. When in ‘TV’ mode, the unit will read the EDID settings of the display device connected to HDMI OUT 1.
  6. HDMI OUT 1-4: Connect each of the HDMI outputs to an HDMI display for simultaneous HDMI distribution, or cascade the output to another transmitter to extend the signal distance.
  7. HDMI IN: Connect the input port of the HDMI splitter to the output of your source device such as a DVD player or set-top box with an HDMI cable.
  8. DC 5V: Plug the 5V DC power supply into the unit and connect the adapter to an AC outlet.