No products in the cart.
8K 60fps (4K@120) HDMI Extender with IR/eARC/ARC/PoC/RS-232/Ethernet/USB and Audio Embedding/De-embedding up to 330ft
NEW
Configure the Perfect Solution
Get Started
Overview
The BG-EXH-8KC6 is an 8K HDMI and USB over HDBaseT Extender designed to extend the range of uncompressed HD/UHD video and audio signals, including eARC/ARC, RS-232, bi-directional IR, 1GbE Ethernet, and USB 2.0 signals, up to 295ft (90m) using a single CAT6A/7 cable.
This extender supports video resolutions up to 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit, and 4K@60Hz 4:4:4. Additionally, it incorporates eARC/ARC functionality, allowing the transmission of audio signals from the receiver HDMI output pass-through to the transmitter's HDMI input or audio de-embedding to the transmitter's output port.
The device also facilitates USB 2.0 signal transmission with configurable Host/Device settings per device and bi-directional Power over Cable (POC) functionality. For home or commercial applications requiring long-distance signal transmission, the BG-EXH-8KC6 stands out as the ideal 8K signal solution.
BZBGEAR AWARDS
BZBGEAR has a number of award winning products from past tradeshow events. These award winning products were nominated and judged against other nominees. See what makes our award winning products so extraordinary!
Features
-
CompliantHDMI 2.1, HDCP 2.3, and HDBaseT 3.0 compliant -
8K@30Hz and 4K@120HzVideo resolution is up to 8K@30Hz 4:4:4 10bit, 4K@120Hz 4:4:4 10bit -
8K Exclusive FeaturesVariable Refresh Rate (VRR), Fast as Possible V-active (FVA), Auto Low Latency Mode (ALLM) support -
Smooth Image ProcessingHDR, HDR10, HDR10+, Dolby Vision and HLG pass-through -
HDMI Audio FormatsDolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio -
Advanced EDIDManagement through EDID DIP switches
- Signal transmission distance up to 295ft (90m) via a single CAT 6A/7 cable
- HDMI re-clocking on the HDBaseT Receiver to help resolve HDMI HDCP compatibility and handshaking issues with displays
- Up to 40 Gbps Fixed Rate Link (FRL) and 18Gbps Transition-Minimized Differential Signaling (TMDS) video bandwidth
- CONFIG DIP switches allow for RS-232 serial port feature control
- Bi-directional support for Ethernet (1Gb), analog audio, IR, RS-232 signal pass-through, and 24V POC
- Support for all industry-standard video resolutions including VGA-WUXGA and 480i - 8K30
- USB 2.0 transmission (with speeds up to 350Mbps)
- The transmitter or receiver can be configured as either a Host or a Device
- Support for eARC/ARC (from RX to TX) sound systems
Enhanced KVM Functionality
Effortlessly link up with your PC, ensuring swift and efficient data transfers via the USB Host. Revel in the convenience of three additional USB extension ports, catering to a range of peripherals like flash drives, mice, and keyboards.
Intuitive eARC Management
Effortlessly toggle the eARC/ARC function with the dedicated button and receive clear status indications through the eARC LED, distinguishing between normal and abnormal operation.
HDBaseT In/Out Ports
The Transmitter's HDBT IN port effortlessly links with the Receiver's HDBT OUT port using a high-quality CAT 6A/7 cable. These ports are crucial for seamless transmission, enabling convergence and long-distance distribution of uncompressed UHD audio and video, Ethernet, USB, controls, and power with zero-latency.
Easy Audio In and Audio Out Interface
Streamline your setup with the analog audio input port and experience flexibility with the analog audio output port, allowing for direct output from the AUDIO IN port of the receiver.
Videos
Award Winning 8K HDMI Extender Utilizing HDBaseT Technology From BZBGEAR | ISE 2024
Tech Specifications
| Technical Specifications | ||||
| HDMI Compliance | HDMI 2.1 | |||
| HDCP Compliance | HDCP 2.3 | |||
| Video Bandwidth | Up to 40Gbps FRL and 18Gbps TMDS | |||
| Video Resolution | Up to 8K@30 4:4:4 10bit, 4K@120Hz 4:4:4 10bit | |||
| USB Bandwidth | Up to 350Mbps | |||
| HDR | HDR, HDR10, HDR10+, Dolby Vision, HLG | |||
| Color Space | RGB 4:4:4, YCbCr 4:4:4 / 4:2:2, YCbCr 4:2:0 | |||
| Color Depth | 8/10/12-bit | |||
| Audio Formats | HDMI: PCM 2.0, LPCM 5.1, LPCM 7.1, (32K/44.1K/48K/88.2K/96K/176.4K/192K) (16/20/24); Dolby Digital, Dolby Digital plus, Dolby TrueHD, Dolby Atmos; DTS Surround, 96/24, ES, DTS Express, DTS-HD HRA, DTS HD Master, DTS:X Analog: PCM 2.0 48K |
|||
| IR Level | 5Vp-p/12Vp-p | |||
| IR Bandwidth | 20K - 60KHz | |||
| Transmission Distance | MAX: CAT6 = 197ft (60m) / CAT6A/7 = 295ft (90m) | |||
| ESD Protection | Human body model: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) | |||
| Connections | ||||
| Transmitter | Input: 1 x HDMI IN [Type A, 19-pin female] 1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x HDBT OUT [RJ45, 8-pin female] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3 pin-3.81mm Phoenix jack] 1 x USB HOST [USB Type B] 3 x USB DEVICE [USB Type A] 1 x ETHERNET [RJ45] |
|||
| Receiver | Input: 1 x HDMI IN [Type A, 19-pin female] 1 x HDBT IN [RJ45, 8-pin female] 1 x AUDIO IN [3.5mm Stereo Mini-jack] Output: 1 x HDMI OUT [Type A, 19-pin female] 1 x AUDIO OUT [3.5mm Stereo Mini-jack] Control: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack] 1 x RS-232 [3 pin-3.81mm Phoenix jack] 1 x USB HOST [USB Type B] 3 x USB DEVICE [USB Type A] 1 x ETHERNET [RJ45] |
|||
| Mechanical | ||||
| Housing | Front Panel - Aluminium / Enclosure - Metal Composite | |||
| Color | Black | |||
| Dimensions (L x W x H) | 7.9in x 3.9in x 1.2in [200mm x 100mm x 30mm] | |||
| Weight | 1.25 lbs (20oz) [1.1kg] | |||
| Power Supply | Input: AC 100 - 240V 50/60Hz Output: DC 24V/2.7A (US/EU standard, CE/FCC/UL certified) |
|||
| Power Consumption | Total power consumption: 20.4w (POC) TX/RX Full Load: 9.36w/9.84w; TX/RX No Load: 2.46w/3.36w |
|||
| Operating Temperature | 32° - 104°F / 0° - 40°C | |||
| Storage Temperature | -4° - 140°F / -20° - 60°C | |||
| Relative Humidity | 20 - 90% RH (no condensation) | |||
| Resolution | 8K30 | 4K60 | 4K24 | 1080P60 |
| Cable Length | 9.8ft / 3m | 16ft / 5m | 32ft / 10m | 66ft / 20m |
| NOTE: The use of “Premium High Speed” HDMI 2.1 cables is highly recommended. | ||||
Resources
Documents
PACKAGE CONTENTS
- 1x BG-EXH-8KC6 Transmitter
- 1x BG-EXH-8KC6 Receiver
- 1x 24V / 2.7A Locking Power Supply
- 1x IR Blaster Cable (1.5m)
- 1x IR Receiver Cable (1.5m)
- 2x 3-pin 3.81mm phoenix connectors
- 4x Mounting ears
- 8x KM3*4 Machine Screws
- 8x Rubber feet
- 1x User Manual
Interfaces
- USB Host: Connect to a PC.
- USB Device: 3 USB extension ports; connect a flash drive, mouse, or keyboard.
- Host/Device USB Control Switch: Switch to left (HOST), the USB HOST mode is enabled;
Switch to right (DEVICE), the USB DEVICE mode is enabled.
Note: If the transmitter is set to USB HOST mode, the receiver must be set to USB DEVICE mode. - Power LED: Light on: The transmitter is powered on.
Light off: The transmitter is powered off. - Link LED: Light on: Transmitter and receiver are in good connection status.
Light flashing: Transmitter and receiver are in poor connection status or connected to the same device.
Light off: Transmitter and receiver are not connected. - In LED: Video signal input indicator.
Light on: There is HDMI signal input.
Light off: There is no HDMI input or the system is powered off. - Out LED: Video signal output indicator.
Light on: There is HDMI signal output.
Light off: There is no HDMI output or the system is powered off. - eARC LED & Button: Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following:
Light on: The eARC/ARC mode is enabled, and the device is working normally.
Light flashing: The eARC/ARC mode is enabled, but the device is working abnormally.
Light off: The eARC/ARC mode is disabled. - DC 24V: DC 24V/2.7A power supply input port.
Note The extenders support POC functionality which means that either the transmitter or receiver is powered on by the 24V/2.7A power adapter, the other one does not need a power supply. - Ethernet Indicators: Ethernet port with adaptive broadband rate. For example, if the transmitter is connected to a PC
with a 100Mbps, and the receiver is connected to a Gigabit router, the device can automatically switch the 100Mbps of the transmitter to Gigabit rate. (Note: If the connected device only supports 100Mbps, the extender cannot switch to Gigabit.)
Light in green: the Ethernet rate is 1000 Mbps.
Light in yellow: the Ethernet rate is 100 Mbps. - IR In: IR signal input port, connect to IR Receiver cable.
- IR Out: IR signal output port, connect to IR Blaster cable.
- RS-232: The RS-232 serial port features different functions by setting the CONFIG DIP switch:
1. RS-232 signal pass-through
2. Control & FW upgrade
3. VS3000 FW upgrade
4. Debug. - HDBT Out: HDBaseT Network port, connect to the HDBT IN port of the receiver with a CAT 6A/7 cable. It is used for various signals pass-through.
- Data Signal Indicator (Yellow): Light on: HDMI signal with HDCP.
Light flashing: HDMI signal without HDCP.
Light off: No HDMI signal - Link Signal Indicator (Green): Light on: Transmitter and receiver are in good connection status.
Light flashing: Transmitter and receiver are in poor connection status or connected to the same device.
Light off: Transmitter and receiver are not connected. - eARC/HDMI In: This port features two functions:
1. HDMI signal input port, connect to HDMI source device.
2. eARC/ARC audio port, connect to eARC/ARC amplifier/sound system. - HDMI Out: HDMI video signal output port. It can loop out the local video signal or output the video signal returned from the receiver.
- Audio In: Analog audio input port. The audio from this port can be output through the AUDIO OUT port of the receiver.
- Audio Out: Analog audio output port. It can output the audio from the AUDIO IN port of the receiver.
- EDID DIP Switch: The DIP switch is used for EDID settings.
- CONFIG DIP Switch: The DIP switch is used to set IR level and serial port access.
- USB Host: Connect to a PC.
- USB Device: 3 USB extension ports; connect a flash drive, mouse, or keyboard.
- Host/Device USB Control Switch: Switch to left (HOST), the USB HOST mode is enabled; Switch to right (DEVICE), the USB DEVICE mode is enabled.
Note: If the transmitter is set to USB HOST mode, the receiver must be set to USB DEVICE mode. - Power LED: Light on: The transmitter is powered on.
Light off: The transmitter is powered off. - Link LED: Light on: Transmitter and receiver are in good connection status.
Light flashing: Transmitter and receiver are in poor connection status or connected to the same device.
Light off: Transmitter and receiver are not connected. - In LED: Video signal input indicator.
Light on: There is HDMI signal input.
Light off: There is no HDMI input or the system is powered off. - Out LED: Video signal output indicator.
Light on: There is HDMI signal output.
Light off: There is no HDMI output or the system is powered off. - eARC LED & Button: Press the eARC button to enable/disable the eARC/ARC function, and the eARC LED will indicate the status as following:
Light on: The eARC/ARC mode is enabled, and the device is working normally.
Light flashing: The eARC/ARC mode is enabled, but the device is working abnormally.
Light off: The eARC/ARC mode is disabled. - DC 24V: DC 24V/2.7A power supply input port.
Note The extenders support POC functionality which means that either the transmitter or receiver is powered on by the 24V/2.7A power adapter, the other one does not need a power supply. - Ethernet Indicators: Ethernet port with adaptive broadband rate. For example, if the transmitter is connected to a PC with a 100Mbps, and the receiver is connected to a Gigabit router, the device can automatically switch the 100Mbps of the transmitter to Gigabit rate. (Note: If the connected device only supports 100Mbps, the extender cannot switch to Gigabit.)
Light in green: the Ethernet rate is 1000 Mbps.
Light in yellow: the Ethernet rate is 100 Mbps. - IR In: IR signal input port, connect to IR Receiver cable.
- IR Out: IR signal output port, connect to IR Blaster cable.
- RS-232: The RS-232 serial port features different functions by setting the CONFIG DIP switch:
1. RS-232 signal pass-through
2. Control & FW upgrade
3. VS3000 FW upgrade
4. Debug. - HDBT In: HDBaseT Network port, connect to the HDBT OUT port of the transmitter with a CAT 6A/7 cable. It is used for
various signals pass-through. - Data Signal Indicator (Yellow): Light on: HDMI signal with HDCP.
Light flashing: HDMI signal without HDCP.
Light off: No HDMI signal. - Link Signal Indicator (Green): Light on: Transmitter and receiver are in good connection status.
Light flashing: Transmitter and receiver are in poor connection status or connected to the same device.
Light off: Transmitter and receiver are not connected. - HDMI In: HDMI Signal input port, connect to HDMI source device. IT can transmit video with resolutions of 1080p@24Hz in
reverse to the HDMI OUT port of the transmitter.
Note:This port is reserved and closed by default. Before using this port, users will need to turn it on through RS232 commands and ensure that the eARC function is disabled. - eARC/HDMI Out: This port features two functions:
1. HDMI signal output port, connect to HDMI display device.
2. eARC/ARC audio port, connect to TV with eARC/ARC function. - Audio In: Analog audio input port. The audio from this port can be output through the AUDIO OUT port of the transmitter.
- Audio Out: Analog audio output port. It can output the audio from the AUDIO IN port of the transmitter.
- CONFIG DIP Switch: The DIP switch is used to set IR level and serial port access.
