BG-QuadFusion-JR - Crestron SIMPL+ Driver
==========================================

UDP control module for the BZBGEAR BG-QuadFusion-JR, a 4-channel HD production
switcher with on-board recording and network streaming. Uses the manufacturer's
binary "Video Switcher V2.1" protocol over UDP port 7000 - NOT the ASCII command
set of the BZBGEAR matrices - so it wires to a UDP client, not a TCP/IP client.
This is a DIFFERENT platform from the BG-QuadFusion-4K (id 0x28 vs 0x69): HD only,
no HDR, a 150-byte status block, audio mixer table 2, plus recording and streaming.
Two-way: program and preview buses, CUT and AUTO, Mix / Fade / Wipe, fade to black,
freeze, PIP and POP, keying, the audio mixer, output resolution, recording and
streaming, with live feedback decoded from the switcher's status block.

CONTENTS
  BG-QuadFusion-JR Crestron Driver User Manual.pdf   Full driver manual: installation, every
                                            module signal, the device feedback the
                                            module parses, and the command reference.
  BG QuadFusion JR.usp                              SIMPL+ source for the user module.
  (BG QuadFusion JR.ush is generated when you compile the .usp - see below.)
  Example/                                  Suggested touch-panel join map and
                                            SIMPL Windows wiring notes.

INSTALLING
  1. Copy every file in this folder into your SIMPL Windows project directory.
  2. Open BG QuadFusion JR.usp in SIMPL+ Windows and compile it (F12). This regenerates the
     .ush header and the user module.
  3. In SIMPL Windows, drop the "BG QuadFusion JR" user module into your program.
  4. Add an Ethernet UDP/TCP Client SET TO UDP, addressed to the switcher on port 7000.
     This product has no serial port and no TCP control port.
  5. Wire the module's Tx_Switcher to the tx$ of that device, and the device's rx$ back
     to the module's Rx_Switcher.
  6. Wire your touch panel joins to the module signals. See the manual for the full
     signal list.

SUPPORT
  Email:   support@bzbgear.com
  Phone:   +1(888)499-9906
  Web:     www.bzbgear.com

(c) BZBGEAR. Crestron, SIMPL+ and SIMPL Windows are trademarks of Crestron Electronics, Inc.
