Buy this bundle
Centralized Audio/Video systems are a common design for maintaining a clean aesthetic appearance. They are extremely popular with homeowners consolidating AV equipment in unforeseen areas like basements, garages, and closets. These robust systems involve a key technology capable of sending source content to one or more displays where family members can view any source on any TV at any time, essentially transforming the home entertainment industry.

This technology is Video Switching and can be accomplished using two primary types of signal delivery. The first is a Matrix Switcher that uses point to point technology via HDMI, SDI, or Category cabling for the transmission of video and audio signals. The second is packet-based switching technology over the LAN. This is the same type of data transmission utilized for streaming from online platforms like Netflix or Hulu using the internet. This technology has a few different names including Video over IP, AVoIP, or Audio-Visual over Internet Protocol.

Why Should I Choose Packet-Based
Video Distribution for My Home?

The vast majority of electronic devices in today's homes work online for sharing information with each other locally or over the web. Since most electronic devices communicate on the Local Area Network, why not incorporate Audio/Video components utilizing the same technology for sharing signals? Hence, AVoIP was born.

AVoIP is a state-of-the-art way to deliver Audio/Video signals in today's AV world. There are many benefits, the most noticeable is the elimination of older expensive video cabling along with the labor to install this cabling in walls, attics, and crawl spaces to reach the equipment or displays. AVoIP also requires cabling, but it only uses a single CAT5/6 cable to send and receive signals up to 328 feet. This single CAT5/6 cable can also power up the devices making it both effective and inexpensive to run cables.

Another benefit is making long-term maintenance much simpler. If a TV suddenly stops getting a video signal, it's easy to deduce that if all sources are working on all other TVs, then it's the Receiver (Decoder/Transceiver) unit located behind the display that has failed. Replace the Receiver and you are back up and running. As a Matrix Switcher is a large centralized unit, if it fails, you’ll need to replace this brain of the system after troubleshooting the issue by process of elimination. AVoIP is more expensive initially, but you’ll be future proofing your system and saving costs on labor and parts if anything fails in the long run.

The BZBGEAR AVoIP system incorporates the BG-VOP-MT Transceiver performing as a Transmitter and Receiver based on the desired location. Included with our AVoIP system is a simple software program that saves time and money by eliminating the requirement for a third-party control system.

BZBGEAR Budget-Friendly Matrix
Switchers Deliver [email protected]
Resolutions for Stunning Imagery
Matrix Switchers come in a variety of flavors, but there are a few types most commonly installed: HDMI, DVI, and HDBaseT. It’s critical to choose the proper switcher based on compatibility as it pertains to connection types, resolutions, audio, and control signals. For local systems only requiring short runs, integrate our BG-UHD-44M providing HDMI connections for four sources and four displays. If TV displays are located at a distance, HDBaseT switchers like the BG-UM88-100M-KIT incorporate the technology to successfully integrate Transmitters within the main unit while signal Receivers reside behind displays for HDMI conversion. BZBGEAR offers many solutions in multiple configurations like 4x4 and 8x8 with a variety of connections covering most project requirements.
Split and Extend Video Signals
for Remote Displays
When it comes to splitting and extending video signals, BZBGEAR offers a variety of HDMI and USB-KVM extenders for remote sources and displays. Our [email protected] HDMI extenders like the BG-EXH-70C will extend video signals and audio up to 240 feet in distance over CAT6 cabling. Split and distribute a single HDMI source to four displays with the BG-DA-1X4AS supporting resolutions up to [email protected] as well as including a variety of audio insertion and extraction ports for audio amplifiers and soundbars.

We also offer KVM Extenders. For those looking to extend their computers to remote displays along with Keyboard and Mouse control, take a look at the BG-EXHKVM-70C. If you are interested in extending more than one or two signals at a time, then consider an HDBaseT Splitter that also uses CAT6 cabling but offers a built-in transmitter. This eliminates the need for individual transmitters assisting with the consolidation of equipment. BZBGEAR offers versions like the BG-UDA-E18 capable of dividing one source to eight TV displays. If you're not certain what device best fits your application, don’t hesitate to consult with a professional AV Integrator first.
Featured Highlighted Products

4-Port 4K 60Hz HDMI Splitter with Down-Scaler w/Digital and Analog audio Output

More info

4K 18Gbps HDMI Extender with Bi-directional IR and Zero Latency up to 70m

More info

4K 60Hz HDR HDMI/KVM/ARC Extender with Zero Latency up to 230ft

More info

1×8 4K UHD 18Gbps HDMI HDBaset Splitter/Distribution Amplifier over Category Cable

More info

Talk to Our Experts
Please complete the information below and one of our Experts will contact you
First Name*
Last Name
End User or Industry Field
Phone Number